CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11

(No reviews yet) Write a Review
SKU:
811.690.11
MPN:
811.690.11
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
  • CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • The cutting edge top sharpening on 9mm (23/64") diameter bits and larger allows for short plunging operations: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Union: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Rabbet: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Biscuit joint using bit #7/8/911.040.11: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Right-angle joint: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Box joint: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Mortise and tenon: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
  • Tongue and groove joint: CMT Orange Tools Z2 Tungsten Carbide Straight Router Bit 1 inch cut length, 3/4 diameter, 2 1/2 total length, 1/2 shank 811.690.11
$14.70
Frequently bought together:

Description

If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products. Made of special Fatigue Proof steel and micrograin carbide, our straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time. You also get exceptional chip ejection to allow cleaner and more constant cutting. The surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue. Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods. CMT produces 91 types of straight bits in a wide range of diameters so you can find exactly what you want.

Safety precautions: never use damaged or worn bits. Always work at the proper feed rate without forcing the bit. Pay particular attention when making the initial cut with a small diameter bit. For best results when working with small diameter bits, make the cut in more than one pass.

Specifications:

Diameter

Cutting Length

Total Length

Material

Shank

Order No.

3/4"

1"

2 1/2"

Tungsten Carbide Tipped

1/2"

811.690.11

 

View AllClose

0 Reviews

View AllClose