Laser Levels & Accessories

Easy-to-use with basic functions for measuring up to a distance of 165ft. Ideal for everyone who works indoors and needs to easily document a high volume of measurements. The data is transferred, via integrated Bluetooth® Smart 4.0 technology, to...

Features: Self-clamping between the floor and ceiling Maximum height: 3.2m (10.5′) Includes adjustable laser mount with 5/8″ UNC thread

Brass Adapter from 5/8-11" to smaller thread.

  Specifications: Measurement range up .........      330 feet (100 meters) Measurement range down  ....      16 feet (5 meters) Beam accuracy up ..................

The S2 Compound Slope Adapter allows the model AS2 laser to be setup to project a compound (dual) slope. An included chart provides information to guide the user through the setup, once both slopes for the site are known.  For slopes not covered by...

The P1 Plumb Plate enables positioning the L4.7 Magnum construction laser over a point on the floor, so that its plumb laser beam can transfer that point to the ceiling, or for other plumbing operations such as elevator shaft control.

Maximum slope laser performance. The Pro Shot™ AS2 Magnum construction laser delivers high end performance in every possible way.  From the ability to set up to a 25% slope with .01% resolution, to its 3300ft (1km) diameter range, to a...

Precision slope laser, great value. The Pro Shot™ AS2 construction laser is the class leader for delivering value in a precision slope laser.  Dial-in up to a 25% slope, with resolution down to .01%.  That is fine enough to set specified...

Servo self leveling, high performance, rugged design and extreme distance. When taking extremely long grade shots is a must, the Pro Shot™ Alpha XD construction laser provides the industry leading performance you need.  All of the great...

The Pro Shot™ Alpha construction laser is designed for concrete and general contractors, working on large commercial or municipal sites. The Alpha laser is built amazingly tough to handle the real-world use and abuse that happens on sites with...

R8 Laser receiver This is our top of the line laser receiver.  It features a 5 channel LCD display on the front and back of the housing.  There are 3 selectable on grade accuracies, ±1/16", ±1/8", and ±1/32".  The...

The R9 Electronic Laser receiver combines an affordable price with the features of high end, high cost laser receivers. It works with all Pro Shot laser levels, and most other brands of rotating lasers on the market. Grade information is conveyed via a...

Laser Grade Rod 4 Pieces 13 Feet Measurements: Inches

The W1 is designed to clamp to the wall angle on drop ceiling jobs, or can be used to lay a laser down into the vertical mode. In vertical mode, the W1 can be set on the floor, or threaded onto a tripod. (The L3, L5, L6, L4.7 and L4.7 Magnum lasers can...

The VM2 is a basic vertical mount that works well with the L4.7, L4.7 Magnum, L5 and L3 lasers for plumb alignment and layout tasks.    Note: The L6 laser does not require a mount for basic vertical operation.

The T2 is a flat-head aluminum telescopic leg laser tripod with a 5/8 x 11 thread. It adjusts from about 3-1/2 feet to 5-1/2 feet in height. The telescopic leg segments are secured by quick release levers.

The MT1 target magnetically attaches to steel drop ceiling wall angle or grid,and can be used with any visible beam rotating laser.

Direct reading laser grade rod  We think this two piece 10' direct reading laser rod is the best thing since sliced bread. The sliding tape is marked in feet, tenths, and hundredths and also gives cut and fill measurements. Simply set the rod on a...

080-0050M NiMH Rechargeable Battery Kit (US) for L6, L5 and L3 lasers   About Batteries and Chargers:   Pro Shot L6, L6C and L3 construction lasers run on 2 D batteries, while the Alpha, Alpha XD, AS2, AS2 Magnum, L4.7 and L4.7 Magnum...