Power Tools

Product Features DCD710 12V MAX* 3/8" drill/driver features two speed transmission (0-400 / 0-1,500) DCF815 12V MAX* 1/4" impact driver features 3 LED lights to provide visibility without shadows DCK211S2 Includes: DCD710 3/8"...

Product Features Charges all DEWALT® 12V - 20V MAX* Li-Ion batteries Charges the battery in 1 hour or less thus minimizing downtime Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace...

Product Features High capacity XRP™ battery has 40% more run-time than standard batteries Powers entire DEWALT® line of 14.4V tools allowing users to run multiple tools off of the same battery pack Specifications Voltage 14...

Product Features DCD785 20V MAX* 1/2" hammerdrill features two speed transmission (0-600 / 0-2,000) DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows Includes DCD785 1/2"...

Product Features DCD985 20V MAX* hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention DCF885 20V MAX*...

The G12SR4 4 1/2" Angle Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble. With...

5 Amp motor for improved performance Variable speed control dial, located on trigger for ease during high-speed or high-torque jobs Impact to drilling switch, located conveniently on body of tool for quick transition Push button reversible...

This durable, lightweight shear is designed to make quick work of cement board up to 1/2" thick. No airborne dust for minimal clean up. Variable cutting speeds up to 2500 RPM will match your pace. Reliable, long-lasting A-2 tool steel blades far outlast...

This lightweight, variable-speed pistol-grip shear cuts 14 gauge C.R. mild steel and most grades of stainless to 16 gauge. Double-insulated, the 5 AMP KD-440 cuts at over 150 inches per minute, leaving a clean, flat sheet, ready to fabricate. Distortions...

    The KD-442 variable speed shear easily cuts through 16 gauge C.R. mild steel and stainless to 18 gauge. The steel shear head has close cutting heavy duty blades that quickly cut through sheet metal, spiral pipe, metal doors and...

  Now you can cut heavy 5/8" drywall, fiberglass, plastic sheet and other construction panels and automatically vacuum up the dust as you cut. The Kett Vacuum Panel Saw features a cast aluminum vac saw head to connect to your shop vac or...

The KSV-432 has a 2-1/2" carbide abrasive blade for fast cutting of drywall, fiberglass and plaster products with dust control. The cast aluminum saw head accepts the nose from your shop vacuum to collect debris as you cut. Great for close quarters where...

 Powerful 7.0 AMP Motor Powerful 7.0 AMP motor delivers 0-1,100 RPM & 0-4,500 BPM for the most demanding applications Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds Sequential...

Largest Crown Molding Cutting Capacity in its Class Includes 5-position Job Site Miter Saw Stand with 9 ft. material extensions for easy jobsite portability and quick set-ups Powerful 15.0 AMP direct drive motor requires less maintenance and...

Anti-Vibration Technology for 2X Less Vibration Powerful 15.0 AMP motor with 0-2,800 SPM Electronic speed control maintains constant speed under load Built-in clutch reduces gear damage by disengaging gears if blade binds 4-position...

Features Makita Lithium-Ion Batteries Charging Technology: Rapid Optimum Charger communicates with the battery's built-in chip to optimize battery life by actively controlling current, voltage and temperature; and has a built-in fan to cool the battery...

Features Charging Technology: Controls current, voltage & temperature to maximize battery life. Central Processing Unit (CPU): Analyzes data from the battery's memory chip. Forced Air Cooling Fan: Cools the battery by forcing cool air through the...

Features Makita Lithium-Ion Batteries Charging Technology: Rapid Optimum Charger communicates with the battery's built-in chip to optimize battery life by actively controlling current, voltage and temperature; and has a built-in fan to cool the battery...

 Cuts 2X Material at 45° Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood 6-1/2" blade delivers a 2-1/4" cutting capacity for a wide range of cutting applications 50° maximum bevel cutting capacity...

2-1/4" Maximum Cutting Capacity Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood 6-1/2" blade delivers a 2-1/4" cutting capacity for a wide range of cutting applications 50° maximum bevel cutting capacity...