Hexplate Accessories

The 10lb Weight is specially designed for use on Pearl Abrasive’s 17” Hawk Buffer (HEX1BFRHK). The Hawk Buffer is a Heavy Duty Floor Machine with a 1 ½ HP Dual Capacitor Baldor AC Motor and SDP (Severe Duty Planetary). The machine has...

Carbide Aggressive Chip #3 with Screw Hole: The full #3 set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Useful when taking up unusually difficult to remove mastics and glue. The chip has a hole to...

Carbide Holder for Carbide Aggressive Chip #3: The full #3 set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Useful when taking up unusually difficult to remove mastics and glue. The chip has a hole...

Carbide Aggressive Chip #3 Hexpin Attachment Complete Set: This set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Useful when taking up unusually difficult to remove mastics and glue. The chip has a...

Carbide Very Aggressive Chip #4 Hexpin Attachment Complete Set: This set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. With 8 Sharp Edges, the #4 is best used to remove thin paint and epoxy from...

Carbide Very Aggressive Chip #4 with Screw Hole: The full #4 set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. With 8 Sharp Edges, the #4 is best used to remove thin paint and epoxy from concrete,...

Gold Diamond Pins: Course Pins, specially designed for Heavy Duty use and to be used for Grinding and Sanding Concrete Surfaces.

Diamond Segmented Pads Attachment: Specially designed to be used on the 15" Hexplate™, they are made with an overall Larger Grinding/Sanding area which increases production. When attached to the 15" Hexplate™, the new and improved Diamond...

Clean, sand concrete and metal surfaces Prep surfaces for new coatings Fast, aggressive surface removal Non-loading Concrete/Stone Application, also: Cast iron Non-ferrous metals Floor coatings Fiberglass Grit: C16 25 Count Case

Pearl’s Hexpin® Scrape & Grind attachments for 15” Hexplate™ are used to scrape away mastic and thin-set. In addition, it also grinds the concrete at the same time. Cost effective diamond pad attachment for Hexpin®. Can...

Diamond Segmented Pads Attachment: Specially designed to be used on the 15" Hexplate™, they are made with an overall Larger Grinding/Sanding area which increases production. When attached to the 15" Hexplate™, the new and improved Diamond...

Diamond Segmented Pads Attachment: Specially designed to be used on the 15" Hexplate™, they are made with an overall Larger Grinding/Sanding area which increases production. When attached to the 15" Hexplate™, the new and improved Diamond...

Green Diamond Pins: Specially designed for General Purpose use and to be used for Grinding and Sanding Concrete Surfaces.

Blue Diamond Pins: Hard Bonded Pins, specially designed to be used for Grinding and Sanding Concrete Surfaces.

16 inch Replacement Felt Pad for Sanding Plate Attachment: Dense Heavy Duty Felt, rated #1 in Density, specially designed for use with the Hexpin 16 inch Sanding Plate Attachment. Hexpin 16 inch Sanding Plate Attachment: Heavy duty aluminum plate,...

Hexpin 16 inch Sanding Plate Attachment: Heavy duty aluminum plate, 3/8" thick felt pad, durable metal center casting. Specially designed for use on 17"-18" Floor Buffer Machines. Includes the HEXICLP clutch plate to fit most floor machines.

Back Up Pad for Diamond Disc Pads: Specially designed to be used with the Quick Change Pins and Diamond Disc Pads, this special back up pad is engineered for Polishing Marble and Granite Floors. Quick Change Pins (HEX15811) are a unique Hexpin®...

Hexpin Attachment Carbide Chip #1 Replacement: The set Specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Use for Scraping and Removal of Thinset, Mastics, Glue, Rubber or Foam Backed Carpet Residue, Dirt...

Hexpin Attachment Carbide Chip #1 Replacement: This set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. Use for Scraping and Removal of Thinset, Mastics, Glue, Rubber or Foam Backed Carpet Residue,...

Carbide Holder for Very Aggressive Chip #4: The full #4 set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. With 8 Sharp Edges, the #4 is best used to remove thin paint and epoxy from concrete, but...