null
Pearl Abrasive

Pearl Abrasive T-29 Greenback Quickmount Trimmable Zirconia Maxi Disc 5" x 5/8-11" 10 ct Box

(No reviews yet) Write a Review
SKU:
MAX5040ZGQ, MAX5060ZGQ, MAX5080ZGQ, MAX5120ZGQ
MPN:
MAX5040ZGQ, MAX5060ZGQ, MAX5080ZGQ, MAX5120ZGQ
Weight:
5.00 LBS
Shipping:
Calculated at Checkout
$0.00 - $137.30

Description

GREENBACK™ ZIRCONIA MAXIDISC™ - TRIMMABLE DISCS

EASY TRIM BACKING SAVES TIME AND MONEY!

Greenback’s™ nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down exposing more flap length. This translates into fewer wheel changes, saving you down time thus reducing your product usage and labor cost.

Non-warping nylon back: Reinforced with fiberglass, gives the Greenback™ flap disc more strength and durability than the competitions plastic back even under the most severe conditions.

Combination polyester/cotton flap: The best zirconia grains, on a special combination polyester/cotton flap, hold the grain more securely and resist clogging.

Less vibrations: Polyester/cotton flaps cushion the backing thus reducing vibration and noise.

Easy grit identification: Never wonder what grit you are putting on your grinder. Even after extensive use you can still identify the grit.

Runs cooler: Exclusive outer coating, over the best premium Zirconia grains available, make the Pearl Abrasive Greenback™ Maxidisc™ flap disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material.

Pearl Abrasive uses only the best abrasive grains and backing material for Maxidiscs™. They only use 100% polyester or a combination of polyester/cotton, NEVER PAPER.  Pearl’s unique way of embedding the grains to a durable polyester or polyester/cotton backing results in a construction that provides superior performance and life.

Features and Specifications:

Zirconia: 100% Zirconia with active grinding agent.

This extremely tough and sharp gain is made for high stock removal. Long life and cool running are characteristics of the high performance grain. Its constant self-sharpening edges work well on:

  • •          Ferrous metals.
  • •          Stainless steel.
  • •          Other high tensile alloys.

Use Type 29 Maxidiscs™ for the maximum aggressiveness and full use of each flap when grinding at an angle.

5 x 5/8-11 inches with hub, available in Z40, Z60, Z80 or Z120 Grit 10ct Case Qtys

View AllClose

0 Reviews

View AllClose