Pearl Abrasive T-29 Greenback Trimmable Zirconia Maxidisc Flapdisc 10ct Case Z40, Z60 or Z80 Grit 6 x 7/8 MAX6040ZG, MAX6060ZG, MAX6080ZG
- MAX6040ZG, MAX6060ZG, MAX6080ZG
- 5.00 LBS
- Calculated at Checkout
GREENBACK™ ZIRCONIA MAXIDISC™ - TRIMMABLE DISCS
EASY TRIM BACKING SAVES TIME AND MONEY!
Greenback’s™ nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down exposing more flap length. This translates into fewer wheel changes, saving you down time thus reducing your product usage and labor cost.
Non-warping nylon back: Reinforced with fiberglass, gives the Greenback™ flap disc more strength and durability than the competitions plastic back even under the most severe conditions.
Combination polyester/cotton flap: The best zirconia grains, on a special combination polyester/cotton flap, hold the grain more securely and resist clogging.
Less vibrations: Polyester/cotton flaps cushion the backing thus reducing vibration and noise.
Easy grit identification: Never wonder what grit you are putting on your grinder. Even after extensive use you can still identify the grit.
Runs cooler: Exclusive outer coating, over the best premium Zirconia grains available, make the Pearl Abrasive Greenback™ Maxidisc™ flap disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material.
Pearl Abrasive uses only the best abrasive grains and backing material for Maxidiscs™. They only use 100% polyester or a combination of polyester/cotton, NEVER PAPER. Pearl’s unique way of embedding the grains to a durable polyester or polyester/cotton backing results in a construction that provides superior performance and life.
Features and Specifications:
Zirconia: 100% Zirconia with active grinding agent.
This extremely tough and sharp gain is made for high stock removal. Long life and cool running are characteristics of the high performance grain. Its constant self-sharpening edges work well on:
- • Ferrous metals.
- • Stainless steel.
- • Other high tensile alloys.
Use Type 29 Maxidiscs™ for the maximum aggressiveness and full use of each flap when grinding at an angle.
6 x 7/8 inches, available in Z40, Z60 or Z80 Grit 10ct Case Qtys