Pearl Abrasive
Pearl Abrasive Floor Preparation System 15" Hexplate w/Super Clutch & 12 Scrape and Grind Pins HEX1712SGCLT
- SKU:
- HEX1712SGCLT
- UPC:
- 662333776788
- Condition:
- New
- Weight:
- 19.00 LBS
- Shipping:
- Free Shipping
Description
Pearl’s Hexpin® Scrape & Grind attachments for 15” Hexplate™ are used to scrape away mastic and thin-set. In addition, it also grinds the concrete at the same time.
- Cost effective diamond pad attachment for Hexpin®.
- Can easily be used with the Hexpin® carbide plate (#HEX17CBD or #HEX17CBDCLT).
- 6 or 12 EZ-MFD pads can be used.
- Spring mounted pins allow for uneven surfaces.
- Can be used wet or dry on concrete surfaces.
15” Hexplate: Specially designed to be used with 17-18” Buffers. Works with a wide variety of interchangeable pins for Grinding, Sanding and Coating Removal. Spring mounted pins to allow for uneven surfaces.
SUPERCLUTCH™- SAFELY PREVENTS COUPLER BREAKAGE AND BUFFER DAMAGE.
Features |
Benefits |
Super Clutch™ will disengage if the Hexpin® Plate hits an obstruction (i.e. bolts). |
Protects operator from injury, protects buffer from damage and keeps buffer coupler from breaking. |
Super Clutch™ is self resetting. |
Simply turn off buffer and restart - less downtime. |
Manually resetting torque locks (red tabs) inside clutch housing will keep clutch from disengaging. |
Easy manual disengagement. |
Torque Locks can be locked into place if there is a problem with the clutch disengaging too often because of the job. Simply loosen the screws holding the torque locks and turn the long end under the toothed slip ring. TIGHTEN THE SCREWS!
CAUTION: Coupler will not be protected if torque locks are left in the lockout position
Quick Change Pins (HEX15811) are a unique Hexpin® attachment with 5/8-11 reverse thread for use with a variety of Quick Change Hexpin® attachments.
Superclutch fits both 11” and 15” Hexplates
Includes 15” Hexplate, Superclutch and 12 Scrap & Grind pads.