Pearl's Professional Wet Cutting Concrete Blades are designed for cutting Concrete and Overlay. Recommended for 20 - 72 HP. Max RPM: 4,365 12mm rim 14 x .187 x 1 Available in Medium or Soft Bond

Pearl's Professional Wet Cutting Asphalt Blades are designed for cutting Asphalt and Green Concrete. Recommended for 20 - 72 HP. This blade is engineered with a drop segment and inserts for FULL CORE PROTECTION, as well as high diamond concentration to...

Pearl's Professional Wet Cutting Asphalt Blades are designed for cutting Asphalt and Green Concrete. Recommended for 20 - 72 HP. This blade is engineered with a drop segment and inserts for FULL CORE PROTECTION, as well as high diamond concentration to...

Pearl's Professional Wet Cutting Asphalt Blades are designed for cutting Asphalt and Green Concrete. Recommended for 20 - 72 HP. This blade is engineered with a drop segment and inserts for FULL CORE PROTECTION, as well as high diamond concentration to...

The S2 Compound Slope Adapter allows the model AS2 laser to be setup to project a compound (dual) slope. An included chart provides information to guide the user through the setup, once both slopes for the site are known.  For slopes not covered by...

The P1 Plumb Plate enables positioning the L4.7 Magnum construction laser over a point on the floor, so that its plumb laser beam can transfer that point to the ceiling, or for other plumbing operations such as elevator shaft control.

ProChalk is formulated to achieve a perfect line every time. Brilliant color tones provide strong, sharp lines. From the brightest pigments in the industry, we produce standard colors. Features: Standard grade marking chalk Brilliant color...

Heavy Duty Backup Pad for Turbo Cut Discs Max RPM: 8,600 7 x 5/8-11

Heavy Duty Backup Pad for Turbo Cut Discs Max RPM: 12,000 5 x 5/8-11

Heavy Duty Backup Pad for Turbo Cut Discs Max RPM: 13,300 4-1/2 x 5/8-11

Concrete/Stone Application, also: Cast iron Non-ferrous metals Floor coatings Fiberglass 25 Count Case C16, C24 or C36 Grit Max RPM: 12,000 5 x 7/8

Clean, sand concrete and metal surfaces Prep surfaces for new coatings Fast, aggressive surface removal Non-loading Concrete/Stone Application, also: Cast iron Non-ferrous metals Floor coatings Fiberglass Grit: C16 25 Count Case

Vacuum Rubber Shield: Specially designed to fit with the Vacuum Hose Port BFVCADP1to create the Buf-Vac. Buf-Vac: Specially designed to adjust to any 17" buffer in just minutes, no special tools needed!

Vacuum Hose Port: Specially designed to fit with the Rubber Vacuum Shield BFVCRB1 to create the Buf-Vac. Buf-Vac: Specially designed to adjust to any 17" buffer in just minutes, no special tools needed! Vacuum Hose Port Specifications: Outlet Hose Port...

Table Extension: Specially designed for use with Tile Saws. Pearl's 10" Pro Wet Tile Saw & Stand VX10.2XLPRO Pearl's 10" Professional Co-Action Tile Saw CX-10

Master Guide: Specially designed for use with Tile and Rail Saws. Pearl’s 10” Rail Saw VX10RS Pearl's 10" Pro Wet Tile Saw & Stand VX10.2XLPRO Pearl's 10" Professional Co-Action Tile Saw CX-10

Angle Guide: Specially designed for use with Tile and Rail Saws. Pearl’s 10” Rail Saw VX10RS Pearl's 10" Pro Wet Tile Saw & Stand VX10.2XLPRO Pearl's 10" Professional Co-Action Tile Saw CX-10 Pearl's 7" Professional Tile Saw...

Wet Cutting Kit: Specially designed for Masonry and Brick Saws. The kit includes: Tub, Drip Tray, Water Hose and Pump. Pearl Abrasive Masonry Brick Saw 14 inches w/3 HP Motor VX141MS Pearl Abrasive Masonry Brick Saw 14 inches w/Heavy Duty 2 HP...

Water Hose Kit: Specially designed for Masonry and Brick Saws.   Pearl Abrasive Masonry Brick Saw 14 inches w/3 HP Motor VX141MS   Pearl Abrasive Masonry Brick Saw 14 inches w/Heavy Duty 2 HP Induction Motor VX141MSPRO  

Brick Saw Stand: Specially designed to fit Masonry and Brick Saws. Pearl Abrasive Masonry Brick Saw 14 inches w/Heavy Duty 2 HP Induction Motor VX141MSPRO Pearl Abrasive Masonry Brick Saw 14 inches w/3 HP Motor VX141MS